To: Embedded Linux Kernel Subset <linux-8086@vger.rutgers.edu> Cc: From: Florian Schiel <beo@eikon.e-technik.tu-muenchen.de> Date: Fri, 11 Jul 1997 12:57:34 +0200 (METDST) Newsgroups: linux.dev.8086 Hi David Here's the promised contenets of my Olivetti: It's got a original NEC V30-10MHz some weird "Faraday'88" chip (must be the chipset, with timers, pic, dma and that stuff, a 88-pin? PQFP-case) and a M58167 RTC from national semiconductor (Maybe someone knows the I/O ports of it :) in the chipset section. For in/out devices it has a 16c451. I think to remember it as an double 16450 Uart, maybe with a parallel port, 'cause there are no extra big chips for that. I also have a PS/2 mouse connector (where the hell's that connected?). and a simple WD3c765 Floppy Controler (=uPD765) On the XT-IDE the normal D8-D15 pins are GND (?) It also has some VGA onboard: a Paradise PVGA1A chip with 256k ram and a ADV471 standard RAMDAC. nothing serious in here... As BIOS there a two 27c256 chips: iguess 32k main BIOS, 32k vga bios I couldn't find some manufacturer, but i remember quadtel somewhere in the bios dump. olivetti pached it without reference... Thats all for the board, but i added some old MFM-Controller to get a HD Up to now i could'nt get it working. It is a WD1002-27 Board (i think). ever heard of these, or des someone hava manual/knowledge about it? It's got a wd11c00 main chip and uses irg5 (and irq2?) It also has 8k of ROM, but i cant read that out due to false config :( As a NIC i use a wd8003 and it works with crynwr packet drivers. Thats all folks! (sorry for getting back to that old topic again...flames will be sent to MSN :) BTW, does anyone have a biglinux driver for the Winbond 38c759AF, a vlb-eide chip, or a UMC um8886 from a pci chipset? would be rather great to get that FIFO's working in there :-)
From Unofficial Linux-8086 Mailing List Archive (ULMLA)
Maintained by Robert
Robert's Mailing List Archive Page
Archive created with babymail