Re: Simply Solar - Plans for Approval

[http://dummy.us.eu.org/robert (Robert )]

I have some questions.

It looks like the panels will be tightly packed.  I would like the option
to be able to walk between the panels to reach the front roof from the
back instead of circumnavigating around them to reach the front. Would
that be an option?  Or, is there some logistic reason that the panels need
to be packed together?

It's not clear from the diagrams, but will the batteries, inverters, and
various panels be mounted to the side of the house?  Or will they just sit
on the ground leaning against the house?  If they are mounted, will they
sit outside the stucco siding?

Thanks.

 > From: Plans and Permitting <http://www.simplysolarca.com/~plans>
 > Date: Thu, 23 Jun 2022 12:04:19 -0700
 >
 > Hello Robert,
 > 
 > Your plans are attached for your review. Please reply to this email
 > to provide your approval. Please confirm the proposed equipment
 > locations, which can be found on the Site Plan, and the module
 > layout, which can be found on the following page.  Due to
 > unforeseen supply chain issues, we've had to change the Silfab 380W
 > panels sold with your system to Q Cell 400W panels.  Q Cell
 > panels are of comparable quality, with a better performance
 > warranty and are also made in the U.S.  With these panels,
 > your solar production will go up from 3.8 kW to 4 kW, at no
 > extra expense to you.
 > 
 > Please note that, unless specified otherwise, conduit will be
 > installed surface-mounted on the exterior of the home. The conduit
 > will run from the array on the roof, down to the inverter, and then
 > over to the electrical panel where we are interconnecting. 
 > 
 > Lastly, if you have any requests regarding installation specifics
 > or are considering making changes to your system, now is the time
 > to do so. Changes made after plan approval may delay your project.
 > 
 > Once you have approved the plans, we will pull the building permit
 > for your project and schedule your installation. Please let us know
 > if you have any questions.
 >
 > Thank you,
 > Matt Joy Designer
 > Plans & Engineering  | Simply Solar
 > (707) 285-7037
 > http://www.simplysolarca.com/~plans
 > www.simplysolarca.com
 > 1740 Corporate Circle, Petaluma, CA 94954